产品展示
梨型吊架
Size Range：1/2″ through 8″
Material：Carbon steel
Finish：Zinc plated, other finish available upon request
Service：
● Recommend for suspension of non-insulated stationary pipe line
● Manufactured to use the min. rod size permitted by NFPA for fire sprinkler pipe line
Approvals：
● Complies with Federal Specification A-A-1192A (Type 10) WW-H-171-E
(Type 10) and MSS-SP-69 (Type 10).
● FM approved (except 1/2") & UL/ULC Listed
Ordering：Specify Part Number
梨型吊架（重型）
Size Range：2″ through 8″
Material：Carbon steel
Finish：Zinc plated, other finish available upon request
Service：
● Recommend for suspension of non-insulated stationary pipe line
● Manufactured to use the min. rod size permitted by NFPA for fire sprinkler pipe line
Approvals：
● Complies with Federal Specification A-A-1192A (Type 10) WW-H-171-E
(Type 10) and MSS-SP-69 (Type 10).
● FM approved & UL/ULC Listed
Ordering：Specify Part Number
标准马蹄型吊架
Size Range：1/2″ through 24″
Material：Carbon steel
Finish：Galvanized, other finish available upon request
Service：Recommend for suspension of non-insulated stationary pipe line
Approvals：
● Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1)
and MSS-SP-69 (Type 1).
● FM approved (Sizes 3/4″ through 8″)
● UL/ULC Listed (Sizes 1/2″ through 8″)
Ordering：Specify Part Number
轻型马蹄形吊架
Size Range：1/2″ through 12″
Material：Carbon steel
Finish：Galvanized, other finish available upon request
Service：Recommend for suspension of non-insulated stationary pipe line
Approvals：
● Complies with Federal Specification, WW-H-171-E (Type 12) and MSS-SP-58
(Type 1).
● UL/ULC Listed (Sizes 1/2″ through 8″)
Ordering：Specify Part Number
轻型马蹄形带衬垫
Size Range：1/2″ through 12″
Material：Carbon steel
Finish：Galvanized, other finish available upon request
Service：Recommend for suspension of non-insulated stationary pipe line
Approvals：
● Complies Manufacturers Standardization Society
MSS-SP-58 (Type 1) and MSS-SP-69 (Type 1).
Ordering：Specify Part Number
竖管夹
Size Range：1/2″ through 24″
Material：Carbon steel
Finish：Zinc plated, other finish available upon request
Service：
● Recommend for suspension vertical steel pipe risers
Approvals：
● Complies with Federal Specification A-A-1192A (Type 8)
WW-H-171-E (Type 8) and MSS-SP-69 (Type 8).
● FM approved (Sizes 3/4″ through 8″)
● UL/ULC Listed (Sizes 1/2″ through 12″)
Ordering：Specify Part Number
轻型竖管夹
Size Range：1/4″ through 16″
Material：Carbon steel
Finish：Galvanized, other finish available upon request
Service：
● Recommend for suspension vertical steel pipe risers
Approvals：
● Complies with Manufacturers Standardization Society
MSS-SP-58 (Type 8) and MSS-SP-69 (Type 8).
Ordering：Specify Part Number
抱管夹
Size Range：1/2″ through 24″
Material：Carbon steel
Finish：Plain or Galvanized, other finish available upon request.
Service：Recommended for suspension of cold pipe lines or
hot lines where no insulation is required.
Maximum Temperature: Plain 750°F; Galvanized 450°F.
Approvals：
● Complies with Federal Specification A-A-1192A (Type 4)
WW-H-171-E (Type 4) , MSS-SP-69 & SP-58 (Type 4).
● FM approved (Sizes 3/4″ through 8″)
● UL/ULC Listed (Sizes 1/2″ through 12″)
Ordering：Specify Part Number
Note: The "C" gap dimension ensures adequate clearance at the top attachment
point for a weldless eye nut or other appropriate rod attachment. This gap may
or may not be present on the bottom portion of the clamp
C型吊架
Size Range：1″ through 8″
Material：Carbon steel
Finish：Zinc plated, other finish available upon request
Service：Recommended for automatic sprinkler system
Approvals：FM approved
Configuration：Supplied with Flange nut and cup nut
Ordering：Specify Part Number
上一页
1
2
3
下一页
TOP